Модульные ИБП серии PLRM

Description

The PLRM Series is a scalable, redundant modular UPS system designed for high-density data centers and critical applications. It features True Online Double Conversion, advanced DSP control, and a modular architecture that scales power and runtime as needed. With N+X parallel redundancy, it ensures clean, uninterrupted power, protecting sensitive devices from network issues.

Options

2 Source input
<3% Input THDi with harmonic filter.
Various voltage settings for different
countries.
Removing input neutral at site.
Fusible Surge Suppression (AC/DC).
Redundant Fans.
Cabinet color can be chosen from RAL
codes.
Cable Entry (Top/side/bottom/rear).
RS485, TCP, SNMP and GSM
Communication.
Automatic Battery Test.
Touch Panel with Mimic Diagram.
Parallel up to 4 units.
DC Load supply.

details

Hannibal Industrial

Modular-UPS.pdf

Monitoring Software

Windows
MAC
Linux

Quote

Click Here

product overview

PLRM Series is a scalable, redundant Modular UPS system designed to cost-effectively provide high level availability for high-density data centers and critical applications. True Online Double Conversion and advanced DSP control technology.
Modular Architecture can scale power and runtime as demand grows or as higher levels of availability are required. Combines the modular design with the N+X parallel redundancy technology. As a result, all unwanted situations that may occur in the network are filtered by the online UPS, and your sensitive devices are fed with clean energy

Excellent performance on non-linear loads
(computer and switching power supplies).
Input and output 50hz, 60hz,frequency
optional.
Intelligent power module based on IGBT
technology full reliability.
DSP (digital signal processor) control.
Low output distortion factor.
High efficiency.
Audible alarm.
User-friendly control panel.
Modular design with swappable power
module.

Redundant parallel operation.
Potential free output voltage.
Full redundant control architecture.
Very fast dynamic response time.
Output short circuit proof.
Wide range of ratings with IP protection up
to 56 as standard.
Low voltage ripple to prolong battery life
time.
Intelligent battery charge and monitoring
control.
Lithium Ion Battery charging options ready
and available.

IGBT rectifier at the core of the best-in-class reliability.
Modular Compact Cabinet Design contains maximum 6 slots.
<3% THDI.
Smart access to UPS data via a large color touchscreen with
2000-event exportable log.
Modular design, up to 3 units in parallel online hot-swappable
N+X redundancy.

technical

details

Input

Technical Data	Ratings
Power Module Capacity	ИГБТ
Переменное напряжение • Однофазное	100 KVA/ Kw
Напряжение переменного тока • Трехфазное	380/400/415 В
допуск по напряжению	323~478Vac
Коэффициент мощности	0.99
Frequency	50 Hz (60 Hz)
Допуск по частоте	40Hz～70Hz
Эффективность	99%
Суммарные гармонические искажения (THD)	<3%
Пусковой ток	≤ 10 x In
Плавающее напряжение	” 2.17-2.27 V/cell VRLA ” ” 1.4-1.42 V/cell Ni Cd”
Рябь	<1%

output

Technical Data	Ratings
Топология инверторного моста	IGBT с выходным разделительным трансформатором
AC Voltage	380/400/415VAC
Допустимое напряжение переменного тока	1%
Frequency	50 Hz (60 Hz)
Допуск по частоте	+/- 0.1 %
Inverter overload capability- 1 minute	<150%
Inverter overload capability- 10 minute	<125 %
Inverter overload capability- 1 Hour	<110%
Harmonic voltage distortion- With 100 % linear load	< 3 %
Harmonic voltage distortion- With 100 % non-linear load	< 5 %
Коэффициент мощности	0.97
Статический переключатель	Тип SCR
Время статического обходного переключения	<4 ms

Батарея

Technical Data	Ratings
Тип	Lead acid or nickel cadmium, Li ion
Автономия	От нескольких минут до нескольких часов, по запросу.
Battery Voltage	± 240VDC
Charge Power	Up to 15 % from System Power

Батарея

Technical Data	Ratings
IEC62040-1:2017	Uninterruptible power systems (UPS) – Part 1: Safety requirements
IEC62040-2:2016	Источники бесперебойного питания (ИБП) – Часть 2: Требования к электромагнитной совместимости (ЭМС).
IEC62040-3:2011	Uninterruptible power systems (UPS) – Part 3: Method of specifying the performance and test requirements
IEC60529:1989 +AMD1:1999	Степень защиты, обеспечиваемая корпусами (код IP)